Condat Lubricants
Australian Chemicals and Coatings are now distibuting Condat Lubricants in Australia for these industries:
. Aluminium Extrusion and Smelting
. Wire Drawing - Steel, Copper and Aluminium
. Glass and Glass Fibre Manufacturing
. Tram and Rail Network
. Petrochemical, Mining Equiptment and Quarrying
. Bio-Degradable, Fire Resistant and Food Contact
. Tube Rolling and Drawing

Aluminium Extrusion and Smelting
Condat are specialists in all Aluminium Extrusion and Smelting. They have a wide range of products, which are designed for specific needs:
 - CONDALU 256C - Covers evenly on surfaces and makes a barrier, which prevents metalic diffusion. It creates a low friction film in a wide range of temperatures and also makes refractory film. Usually sprayed.
 - GREASE FL20 - Graphite grease for treating rings on extrusion log casting equipment. The molten aluminium sets in the ring and then moves down into a water cooled pit -kind of continuous casting.
- GREENFLUX 400 - sawing of cold billets etc. Used neat by micro spray. Non staining
- CONDALU 97 can be used to coat chutes transferring Aluminium from furnace to moulds etc. (like a ladle coating)
- TERMASYNTH EP2 - for lubrication of furnace door hinges. Could also be used on Ingot moulds.
- CONDALU 97 and CONDALU 51 - can be used to lubricate small ingot moulds- CONDALU 97 is a pre-treatment painted after moulds have been cleaned, CONDALU 51 is a top up coating during use and is sprayed onto the hot mould as supplied when sticking becomes a problem. An ingot moulding machine looks like a tank track with the moulds making up the links. The aluminium is introduced into the next mould which then travels up at around 45 degree angle along the track (with cooling) until it reaches the top where the ingot mould tips over (releasing the ingot) and travels on the underside of the machine back to the bottom.
- HT2906 - can be used on chains driving ingot casting equipment. 
- CONDALU 51 - can also be used to lubricate hot cropping knives. For hot cropping of Al extrusion log.

 

Wire drawing – Steel, Copper, Aluminium
Recognized throughout the world, the VICAFIL &Steelskin range is specially designed for wire, tube, bar drawing and metal rolling. All materials that can be worked with:

- mild steels, 
- hard steels,
- stainless steel alloys,
- copper and alloys
- aluminium and alloys

Glass and Glass Fibre Manufacturing
 Condat Lubricants supply an array of products suitable for use in the Glass Fibre Manufacturing.

 HT2906 – is a semi-synthetic oil designed for the lubrication and protection of transmission and transport chains working at elevate temperatures. It’s recommended for painting line chains and conveyors laminated panel production and fibre glass production lines.
 Chain Oil WP46 – is a synthetic oil designed for the lubrication of transmission and/or transport chains working under heavy loads and wet conditions. It has a low surface tension ensuring excellent penetration of lubricant into difficult to reach areas.
 G Start – is a graphite technical coating that produces a coating on all metallic surface in order to modify their frictional and surface properties. It is usable in a wide variety of activities where friction constraints are important. These activities include: Mechanical, Glassmaking, Forge, Foundries and Wiredrawing.
Condaglass Range – Condaglass 370 and Condaglass 379 are swabbing lubricants containing graphite, sulphur and other additives, for hollow glass packaging. These products are recommended for all glassware and all forming processes.  
Bioglass – There are 3 versions of Bioglass in the condat range. Bioglass 08 is a synthetic soluble, water based lubricant which is biodegradable and designed for glass cutting. Bioglass DLS 80 F is a shear spray lubricant, very similar to Bioglass 08 but it does not contain mineral oil. Bioglass DLS 90 F is the same as Bioglass DLS 80 F but it contains a unique mixture of oils.

Tram and Rail Network
Condat provide an extensive range of railroad switch lubrications.

Switch Rail Greases : biodegradable greases developed for the lubrication of mobile points and devices of railroads.
Railway Wheel Flange Lubrication: biodegradable and no toxic greases and oils, 100 % synthetic, intended for the lubrication of wheels through embarked or fixed distribution systems situated around railroads. These lubricants allow a significant reduction of the noises and the wears.
Rail Fich Plate Lubrication:  Biodegradable and non-toxic grease, easy to apply, to ensure slippage and the disassembly.
Catenary Lubrication: Greases manufactured with dry lubricants to ensure the interface between catenary / pantograph. This lubricant allows to reduce wear due to friction and protect the cable from external elements. 
Greases for Curved Railroad Tracks : Biodegradable and non-toxic greases. When they are applied to the input curves, they allow reducing wear on wheel / rail contact and limited significantly noise (squealing, etc ...) 
Wheel Flange Greases: Biodegradable and non-toxic oils and greases. Applied with adapted lubrication systems, they can limit the wear between the Wheel and the Rail, and reduce the noise associated to friction. Buffers and Screw Coupling Lubricants: Biodegradable oils and greases, or "mineral" with dry lubricants, to protect contact surfaces against wear and corrosion. 
Bogie/Truck Grease:
Grease for the lubrication of bogie/truck (Axles, Levers…). It has excellent protection against corrosion and wear.

Petrochemical, Mining Equipment and Quarrying
Bio-Natur Hydrolabel - is an Eco-Label certified high quality hydraulic oil formulated for saturated esters. It is specifically recommeneded for different places where spillage recovery can't be organised in a preventative way to protect the environment.
Condat D - This is a range of synthetic fluids without water content formulated organic ester base. When hydraulic installations are working in close premises where fire risks are present, Condat D can be used.
Bio-Natur Grease - is a general purpose viscous grease. It must be used instead of usual greases when environmental protection is taken into account. It's especially designed to be used in centralised greasers and low power reduction gear units.

Bio-Degradable, Fire Resistant and Food Contact
 CONDAT has developed a specific and complete product range of:

- Fire-resistant and biodegradable hydraulic fluids
- Fire-resistant and biodegradable greases
- Special greases for gearboxes
- Biodegradable concept preventing dust formation
- Food-grade greases

All of these products are compliant with:

- The latest safety and environmental standards, and
- Manufacturers' approvals and specifications required by the largest international users.

Nutrigrease HP – is specially developed for use under extreme conditions of load, temperature and humidity (such as may be found in animal feed granulating presses.) It can be used in all sectors of the food and drink processing industries.

Cardboard Corrugating and Paper Mills

Mitra - is a synthetic product designed for the lubrication of disc-cut and cutting systems on single or multi-face corrugated lines.

Termasynth EP2 – Lubrication under severe conditions of use, high temperatures, presence of solvents, acids and radiation is often hard to control. The use of Termasynth EP 2 synthetic grease provides good results in these fields.

Tube Rolling and Drawing
Condatub SL 550 - is a bio stable micro-emulsion oil designed for rolled and welded rube production and forming operations. It is generally used at 5% as coolant for the production of rolled and welded tubes and is recommended for Aluminium, Stainless Steel and the most severe operations on carbon steel.

 Australian Chemicals and Coatings have proudly been distributing Condat Lubricants across Australia for more than 5 years. We offer Condat's extensive rage of lubricants covering all the industrial needss in the field of Rod Wire, Cold Rolling, Wire Drawing and Drawing of bars and Tubes. With a large spectrum of analysis, Condat take into account all essential parameters for quality and can ensure to supply to its customers products most adapted to their needs as well as a proper recommendation. It also allows Australian Chemicals and Coatings and Condat to provide its customers with the insurance that they will get consistent and reliable products.

For further information please contact: